Announcement
Collapse
No announcement yet.
Long Trip Plans
Collapse
X
-
Houndawg76
Thanks for all the great advice! I am planning on a new front tire this spring- it has plenty of tread but there are cracks appearing in the sidewalls. I've been on Craigslist to see what kind of a deal I can scrounge up on saddlebags, and have replaced the clutch cable a couple of years ago. I am running tubeless tires- I didn't think about a tire repair kit- where do you get a kit like the one in the picture, BCCAP? Right now the big thing on my list is rebuilding the front brake calipers and putting break pads on the front and back.
-
I picked up mine from a local shop but I see they have them on Ebay........
http://www.ebay.com/itm/Cargol-Turn-...xVAbQO&vxp=mtrOld age and treachery will beat youth and skill every time1983 GS 750
https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg
Comment
-
Not yet. I bought it because it was the only kit that came with CO2 cartridges. { or whatever the gas is } What's a string patch ?Old age and treachery will beat youth and skill every time1983 GS 750
https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg
Comment
-
Comment
-
DohcBikes
-
Long trip is in the eye of the beholder I suppose. 800 miles isn't that long in my opinion, but after a 500 mile day im pretty shot. My ES isnt exactly a touring rig however. Last year I got a drywall screw in my rear tire and had to buy a plug kit mid trip. It was the rubber mushroom plug type kit with installation tools and CO2 cartridges. The plug held fine for another 2k miles and now the tire is worn out. I didnt get to test the CO2 cartridges though. The screw leaked very slowly, so I did the repair in a convenience store parking lot with an air pump and saved the cartridges.sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/
Comment
-
See my link about rearets
Mods for Long Distance on a GS Suzuki
Also go for a windshield, bar end weights (to reduce vibration) and some form of mechanical cruise control like this:
or even one of these helps a lot:
Throttle Wrist Rest
And wrap your toolkit up with a nice piece of old carpet. Something you can kneel on by the side of the road to fix that ignition system:
Richard
sigpic
GS1150 EF bought Jun 2015
GS1150 ES bought Mar 2014: ES Makeover Thread AND blog: Go to the Blog
GS1100 G (2) bought Aug 2013: Road Runner Project Thread AND blog: Go to the Blog
GS1100 G (1) Dad bought new 1985 (in rebuild) see: Dad's GS1100 G Rebuild AND blog: Go to the Blog
Previously owned: Suzuki GS750 EF (Canada), Suzuki GS750 (UK)(Avatar circa 1977), Yamaha XT500, Suzuki T500, Honda XL125, Garelli 50
Join the United Kingdom (UK) Suzuki GS Facebook Group here
Comment
-
As for your tires. I would recommend getting two bottles of RIDE ON tire sealant. Cheap insurance against flats.sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
Comment
-
Tim Tom
In 2012 I took my 850G from NJ to CA and back. Ended up being an 8,000 mile trip. Things that broke on that trip:
1.) The RR blew on day 3. It was the original one in the bike, I had a spare with me, was replaced and back on the road in about an hour.
2.) Same day I ran the bike really hot and melted the silicone valve cover gasket. I did not have a spare with me, so I ended up putting in oil every day until I could get the part in Reno NV.
3.) Not a break down, but I did have to fit a new rear tire in Denver. I knew the tire on the bike had enough life to get me to Denver, but not much further. Shipped the tire to a friend there ahead of time and took care of it.
Those were my only issues. In 21 days and 8,000 miles of riding. And two of them happened on the same day!
I did bring quite a few tools with me, full socket set, box wrenches, needle nose pliers, zip ties, spare wire, wire strippers, wire cutters, volt meter, some spare fuel hose, and my tire plug kit. Also had some JB weld, and gasket maker. Because of the length of the trip I had a full set of replacement spark plugs, spare new stator and RR, spare clutch and throttle cables, and my valve shim kit. Rather than rely on the CO2 bottles I went for a Slime Mini Air Compressor that you can run off the battery of the running bike. Also had the string type tire plugs, with associated reamer and puller tools. I only used about a quarter of the tools I brought with me, but I'm glad I did have them in case they were needed.
Some overall advice:
Make sure your bike is running great before you leave. Adjust your valves, sync your carbs, change the oil. Have front and rear brakes in excellent condition. Check the forks and swingarm for play caused by bad bearings. Make sure the fork seals are in good shape and not leaking. Be sure the fuel lines are in good shape and not cracked or damaged. Good tires with enough LIFE (Not tread!! They are different!! Learn how to read the age of the tire, and if it's over 5 years old REPLACE THEM!!)
Make sure you have riding gear that fits and is comfortable to wear all day. If your helmet fits poorly and creates a pressure point, you will not have a fun trip. Get rain gear if you don't have it! Waterproof boots and gloves are a must.
Stretch and hydrate often throughout the day as you ride. Ideally every 120 miles or so. Whenever you get gas, take the time to stretch, drink water, eat a snack. Doing so will greatly reduce fatigue before it happens. Once you are tired it's too late.
I found it easy enough to ride about 400-500 miles in a day. That left me plenty of time to find a nice campsite and relax a bit. 800 miles should be a breeze provided your bike is running properly and you ride smartly.
Comment
-
jdvorchak
I've done plenty of touring. We usually go about 2 to 3 thousand miles for the entire trip. I have a cup holder and keep refilling the water bottle at every stop. Take a few sips often while riding. Only tools I only carry are a credit card, cell phone and towing insurance. I have windshield cleaner and microfiber towels because if you smash only one bug it will be in your line of sight. I've found that if I run for 100 miles or 1 1/2 hours at a time then stop for fuel and snacks and more liquids I enjoy the ride more. Rarely drink soda (pop) but will drink either water or sport drink like Gatorade. You don't realize how quickly you will become dehydrated and one of the first things to go is decision making and reaction times. Take your time and enjoy the ride! I've done 580 miles in a day and I've done 300 miles in a day. Enjoyed the 300 mile days more than the 500. Now this is just me. It's the ride not the destination...
Kind of a funny story. My wife and I were in Key West and I saw a guy on a brand new Harley Ultra Classic touring bike so I stopped to talk a bit. I asked where he was from and he told me (don't remember) but he said "Rode 328 miles yesterday to get here!" Like he was really proud of that. My wife looked at me and said "Didn't you just ride 360 mile for lunch the other day?" End of conversation....Last edited by Guest; 01-24-2016, 07:01 PM.
Comment
Comment