.png "Powered by vBulletin")
Right, so since I've had this thing for 2-3 years, and I'm getting a chunk back on taxes I'm going to hopefully (finally) fix it, or at the very least get it so it'll run regularly and I can run it around the yard until I can get EVERYTHING fixed. Hasn't been started/run since last year, it's a 81 GS750(E?).
Now, the list I would like. I've seen on here it says to buy o-rings and not a carb kit, could I have a link to that, please? I was originally going to buy a kit off ebay until I saw that. (Would it be a good idea to buy a kit for the gaskets, and maybe a new float, or no?)
Oil leak, it looks like it's leaking oil from where the oil goes up to the cooler and back down (I'll attach pictures.) Is there a gasket for this?
Everytime I have had it running, it will not idle without a little choke, or it'll idle at about 700 RPM if I was lucky, 9/10 times it would choke out without any choke. (I'm assuming carb cleaning will fix this, I could be wrong.)
Tune up kit is obvious, but since I don't know the first thing about motorcycle engines, is it like my old 63 Corvair with points, condenser, etc.? Or is it like newer cars and all I have to worry about is dist cap, rotor, plugs, etc.?
Rectifier, charging system. I'm assuming it's charging just a bad battery since once it's running and I cut the headlight on it doesn't automagically choke out, and the light gets brighter as I rev it. Or is the electrical (Engine) system run on a magneto on these? And should I go ahead and check the charging system regardless? (It'd be pretty awesome in my opinion if these had a magneto and not a coil.)
Is there anywhere that I can order a print copy of the service manual specific for the 81? I have BikeCliff's site, and I could certainly buy a printer and print 'em out, but I'd rather have the specific manual for my specific bike.
Instrument cluster is busted, need a new one of those, but the question on that is the gear indicator doesn't work, how would I get that to work?
As far as running is concerned, I don't recall hearing anything clicking, clacking, or otherwise. Clutch works good, shifts gears well. There anything in there I need to take apart and check?
Last thing, the running chain. How would I check to see if that's in acceptable condition or if I need a replacement?
As with what I've come to realize on my Corvair, I'm going to assume nobody has done any work on this bike other than basic tune ups, and that everything on the bike is original from the factory.
And the pictures.
Any other advice would be greatly appreciated, thanks.
Now, the list I would like. I've seen on here it says to buy o-rings and not a carb kit, could I have a link to that, please? I was originally going to buy a kit off ebay until I saw that. (Would it be a good idea to buy a kit for the gaskets, and maybe a new float, or no?)
Oil leak, it looks like it's leaking oil from where the oil goes up to the cooler and back down (I'll attach pictures.) Is there a gasket for this?
Everytime I have had it running, it will not idle without a little choke, or it'll idle at about 700 RPM if I was lucky, 9/10 times it would choke out without any choke. (I'm assuming carb cleaning will fix this, I could be wrong.)
Tune up kit is obvious, but since I don't know the first thing about motorcycle engines, is it like my old 63 Corvair with points, condenser, etc.? Or is it like newer cars and all I have to worry about is dist cap, rotor, plugs, etc.?
Rectifier, charging system. I'm assuming it's charging just a bad battery since once it's running and I cut the headlight on it doesn't automagically choke out, and the light gets brighter as I rev it. Or is the electrical (Engine) system run on a magneto on these? And should I go ahead and check the charging system regardless? (It'd be pretty awesome in my opinion if these had a magneto and not a coil.)
Is there anywhere that I can order a print copy of the service manual specific for the 81? I have BikeCliff's site, and I could certainly buy a printer and print 'em out, but I'd rather have the specific manual for my specific bike.
Instrument cluster is busted, need a new one of those, but the question on that is the gear indicator doesn't work, how would I get that to work?
As far as running is concerned, I don't recall hearing anything clicking, clacking, or otherwise. Clutch works good, shifts gears well. There anything in there I need to take apart and check?
Last thing, the running chain. How would I check to see if that's in acceptable condition or if I need a replacement?
As with what I've come to realize on my Corvair, I'm going to assume nobody has done any work on this bike other than basic tune ups, and that everything on the bike is original from the factory.
And the pictures.
Any other advice would be greatly appreciated, thanks.
Comment