Announcement

Collapse
No announcement yet.

Breather cover gasket templete

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Breather cover gasket templete

    I am off to do a valve inspection next and found the valve cover gasket no problem but cant seem to find the Breather cover gasket and according to clymer I have to remove it. I know I can get gasket material from Autozone and I am a leatherworker so I have a bunch of half round and circular punches in various sizes. Does anyone have a pdf template?

    Strange I cant find a gasket on ebay. A bunch for the 82' 1100E but none for my 82' 750

    #2
    The gasket will likely stay stuck on, one corner of mine tore,but I just reused it. They are still avalilable new for about $8 at your local suzuki store.

    If you're cheap like me, just use the cover as a template.
    1981 gs650L

    "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

    Comment


      #3
      Originally posted by Boriqua View Post
      I am off to do a valve inspection next and found the valve cover gasket no problem but cant seem to find the Breather cover gasket and according to clymer I have to remove it. I know I can get gasket material from Autozone and I am a leatherworker so I have a bunch of half round and circular punches in various sizes. Does anyone have a pdf template?

      Strange I cant find a gasket on ebay. A bunch for the 82' 1100E but none for my 82' 750
      Should be the same one.
      sigpicMrBill Been a GSR member on and off since April 2002
      1980 GS 750E Bought new in Feb of 1980
      2015 CAN AM RTS


      Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

      Comment

      Working...
      X