.png "Powered by vBulletin")
I bought a stock gs1000 seat off eBay, the pan is real rusty and many of the spikes that hold the seat cover on are missing. Is ther a method to hold the seat cover down when they are missing? Velcro?
Any ideas
thanks
Any ideas
thanks
-
sigpic
1982 CB900FS
1979 CB750F
1978 GS 1000E
1978 GS 1000C
2018 Goldwing dct tour -
Deal with the rust as a primary concern. It's going to be tough but if the cover stretches round far enough (so you can get them in vertical where there is "meat" in the foam self tappers might work... (I might be inclined to take the point off them first before screwing in anyway)1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/ -
My bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000NComment
-
Look here.
http://pandkclassicbikes.co.uk/ go to home page and look for spike strip. I've used them, they are very sharp wear gloves.My bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000NComment
-
My PO used short, 50mm, strips of aluminium 3x15mm and riveted them into the underside of the base to clamp the vinyl.97 R1100R
Previous
80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200Comment
Comment