Announcement

Collapse
No announcement yet.

78 Suzuki gs1000 oil change

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    The actual spec is
    3.6 qts oil only
    4.0 qts oil and filter
    4.4 after overhaul

    i always change the filter with every oil change so a gallon jug of Rotella 15w-40 is perfect as mentioned. Good to see someone else from coastal Georgia on here. I'm a little further south at the Jekyll island exit. Best of luck.
    1978 GS 1000 (pods, V&H 4 to 1, Dyna S, Dyna coils, stage 3 jet kit, Progressive springs, relay mod, 530 chain, Honda regulator, clutch basket welded and shimmed)
    1970 Honda C70

    Comment


      #17
      Ive never had to use that full 4th Q when doing an oil change to get it to the F mark. I always have a little left over. But the manual says what it says.
      MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
      1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

      NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


      I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

      Comment


        #18
        Coastal Georgia in the house!
        Dumpster...I see your gs grand has a welded and shimed clutch basket...wats that? And I'm good with putting the whole gallon of rotella (super cheap at Wal Mart btw I love it) in after I change the filter?

        Comment


          #19
          I ment GUMPSTER.... Stupid auto correct...

          Comment


            #20

            Attached is a link that explains a clutch rattle repair that usually is most prominent at idle. My 1000 was horrific but used this link to guide me through a successful repair. APE clutch nut is also advisable if you ever have to remove the clutch basket. If it's not making a racket, then no repair needed.
            1978 GS 1000 (pods, V&H 4 to 1, Dyna S, Dyna coils, stage 3 jet kit, Progressive springs, relay mod, 530 chain, Honda regulator, clutch basket welded and shimmed)
            1970 Honda C70

            Comment


              #21
              Is the oil plug a 20mm? I've tried everything up until a 19 so I'm guessing it's a 20mm?

              Comment


                #22
                Originally posted by Bjones89 View Post
                Is the oil plug a 20mm? I've tried everything up until a 19 so I'm guessing it's a 20mm?
                I don't know the metric size but a 13/16 sparkplug socket fits perfectly. There should be a sparkplug wrench in the tool kit.
                '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM) My Flickr site http://www.flickr.com/photos/soates50/
                https://farm5.staticflickr.com/4306/35860327946_08fdd555ac_z.jpg

                Comment

                Working...
                X