Breather Screens ... or Whatever They're Called

[Mr.humbucker]

I am restoring (finally) a GS650G and was putting the valve cover on yesterday when I realized I couldn't find the mesh metal screens filter things ... (obviously I don't know the proper name for them) that sit in the small crankcase vent area atop the valve cover. I couldn't find them in the manual either nor on a fiche for Partzilla etc. Can someone help me and tell me what the proper name for these area and where I might get replacement?

[GregT]

Cut up a steel wool scouring pad as a replacement.

[Steve]

Or, if you want to get the real thing (and aren't afraid to spend a bit of money), feel free to look at other GS models. It's on the Cylinder Head Cover fiche. On the 850, these are the part numbers:
Separater, oil (34x110) p/n 11186-45001, $3.11 (you need two)
Separater, oil (35x68) p/n 11187-45001, $3.11 (you need two).

These are the prices from Parts Outlaw, others will be different. Parts Outlaw is currently offering a discount on flat-rate shipping, it's $4.99, instead of $9.99.

.

[Mr.humbucker]

Done ... pretty reasonable shipping so I finished off my "needs" list for this project and hit send. Thanks for the help - again. I learned something new today that the old fiches don't necessarily have "all" parts listed and to go to other listings/bikes/models' fiches to find what I am looking for.

Thanks again!