Hierarchy of GS 1000G Manual

[free99]

Hey everyone,
I'm getting a little tired of digging my phone out of my pocket every time I need to double-check a step when doing something to my 1980 GS1000G.

I just want to be sure here, the 1000G factory manual follows the regular "1000E/S/L" manual on bWringer's site with a supplement to cover the 1980s models right? Where do I get the supplement itself?

I see this guy on eBay selling the right manual, but with shipping from NZ it comes out to $72! I also tried taking the PDF I found on bWringer's site to staples and they quoted me $86 for a spiral bound.

Any suggestions?

[Rijko]

with those prices it's cheaper to buy a new printer,
hole puncher and binder and print them yourself ..

[LAB3]

In my manual the supplement is the last chapter of that manual.

[free99]

Thanks for the clarification LAB3. Rijko, you got that right. If only I could use the work printer, but I think even they might grumble if I printed 200+ pages double sided for free haha.

[Cipher]

I printed and bound mine at work. But then I was the IT guy so no one said anything.

[Rob S.]

...(use a) new printer,
hole puncher and binder and print them yourself ..

That's what I did. Very time intensive, what with resizing and double siding, and the end result is quite grainy.

[bwringer]

Just print the bits you need when you need them.

There are large swathes of the FSM you'll never need, or where better information is now available.

[Steve]

Manual? We don' need no steenkin manual.

OK, yeah, I used the manual the first time, but after doing stuff a few times, even I learned what was needed.

.

[free99]

Well... sometimes there are steps that I forget and having paper to reference would be cool. Can't just print the stuff out, I don't have a printer at home. I'll figure it out I guess.