Announcement

Collapse
No announcement yet.

STATOR REMOVE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    STATOR REMOVE

    Im trying to pull my stator rotor i dont have a puller is there a another way to do this with out a puller

    #2
    Re: STATOR REMOVE

    I would not try to do it without the puller. You can order a puller at any bike shop from their K & L catalog. Mine cost $24. Its too easy to cause more damage repair costs than the bike is worth. Not worth the risk for $24.

    Earl


    Originally posted by john
    Im trying to pull my stator rotor i dont have a puller is there a another way to do this with out a puller
    Komorebi-The light filtering through the trees.

    I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

    Comment


      #3
      Is the puller the same for a lot of models? like 750,1000,1100,1150?

      Comment


        #4
        No, not the same for all. I believe.....here goes my memory again. :-)....
        that 1979 and earlier 750 8 valve, 8 valve 850 and 8 valve 1000 use the same rotor puller. 16 valve, 1980 and later for those models use a different puller. Except for 850's which I believe retained the 8 valve configuration.
        1100 and 1150 use the same puller except for (if I remember again :-) )
        1980 1100's which had a small crank end that year. Otherwise, 1100/1150 used the same puller. I dont know it it is the same as either of the other two though.

        Earl

        Originally posted by robinjo
        Is the puller the same for a lot of models? like 750,1000,1100,1150?
        Komorebi-The light filtering through the trees.

        I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

        Comment


          #5
          What year and model is your bike? I will send you my puller as long as you send it back to me.

          Hap

          Comment


            #6
            Originally posted by Hap Call
            What year and model is your bike? I will send you my puller as long as you send it back to me.

            Hap
            In another topic he is searching for a GS1000E header so I think that's his ride no year though.

            Earl thanks for the puller info!

            Comment


              #7
              I had to buy a new rotor last time i tried to remove it without the tool

              Comment


                #8
                You're more than welcome. Check it before spending any money. Sometimes, I think I'm losing my mind, and other times I dont remember losing anything. :-)

                Earl

                Originally posted by robinjo
                Earl thanks for the puller info!
                Komorebi-The light filtering through the trees.

                I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

                Comment

                Working...
                X