Look a carb question

[Anonymous]

I just recently found this site and what a great place. Now for the question. I was given a 1982 GS1100G that had been sitting for 18 years in my aunts garage. I have gone thru and done many things and now I am at the carbs. On the top of the carb where the air screw should be is just a small hole in what looks to be a passage. Is this a cap that restricts access to the air screw or something else? It looks like a cap/plug. I have had the bike running but am still restoring.

[SqDancerLynn1]

It is just a tamper proof cap Thanks EPA It is easy to remove Just drill a small hole in it & insert a self tapping screw & pull it out. BE CAREFULL you only need to drill 3/16" the mixture screw is underneath

[Anonymous]

Thank you. I will continue on the path.

[Anonymous]

carb

before you touch the screws take the time to record how many turns each one is set at so you have a base # and can have an idea where to start at, when retuning each will have a different # of turns

[Anonymous]

Noted and done. And a cleaning we will go.

Thanks