Wiring harness routing pic needed - Sandy

[Hoomgar]

Sandy, I am going to take you up on that picture offer. I need some pics of the wiring harness if it isn't too much trouble. I need to see how it routes up through the triple tree area and on what side and I also need to see how they layed it in the tail area and under the seat. This thing is like a worm and it is giving me grief.

Or if anyone knows where a good pic is on the internet that shows it?

Thx

[SqDancerLynn1]

I can scan my book if you still need a copy of the wiring send a PM

[Hoomgar]

I can scan my book if you still need a copy of the wiring send a PM

I am looking for a pic of it installed in the bike so I can see how it is routed Lynn. I have all the shop manuals for this bike and several wiring diagrams but they only show connection which I am OK with. I just need to see how the thing is physically routed through the frame.

Thx

[Anonymous]

hi Mark, i have the gs1000 cd with routing pics. if you are still having pros i can mail you the relevent pages. Dave

[Hoomgar]

hi Mark, i have the gs1000 cd with routing pics. if you are still having pros i can mail you the relevent pages. Dave

Dave, that would rock! I am actually at a point where I cannot continue without them. Thx a million man. Can you email them to megabyte@ptd.net

[Hoomgar]

Does anybody know and have some pics that could help me? I am really screwed here without them. I cannot belive something like this is hanging me up but it is. I cannot for the life of me find this information anywhere.

If you can help me, Please!

[Hoomgar]

Thx guys.

I posted in my build thread:

http://www.thegsresources.com/_forum/viewtopic.php?p=311865#311865

[Anonymous]

hi Mark, it seems you got sorted before i could scan the relevant pages for you. if you have any probs in future, i will mail you the pages you need. \

Dave

[Hoomgar]

Thanks Dave. I really appreciate everyones help. You guys are awesome.

[Sandy]

Hope you you're not on dial-up. I just sent you about 5MB worth of pics. Good luck, any questions just post it or PM me.

[Sandy]

Hope you you're not on dial-up. I just sent you about 5MB worth of pics. Good luck, any questions just post it or PM me.
OOPS. Double post!!!

[Hoomgar]

Hope you you're not on dial-up. I just sent you about 5MB worth of pics. Good luck, any questions just post it or PM me.

Nope, I rock and roll at over 3mbps Sandy so no worries. I got them. Thx

Sandy, they are exactly what I needed. Thx a million

[Hoomgar]

Hey guys, thx again for all the help. Lynn, Sandy, those pics did it. I got my entire harness routed and connected. I am ready for juice.

Now I just need an engine

[Sandy]

WOO HOO! Sounds great. Put the carbs back on mine tonight and started to sync them. Fixed the choke problem I've been having last couple years but for some reason it's way rich at idle on #3. If I can't sort it out tomorrow maybe I'll have to pull the rack tomorrow recheck the float adjustment and needle and seat. Somethings not quite right. Anyway sounds like yours is coming along great. Glad to be of help.