Announcement

Collapse
No announcement yet.

How to tell what coils to order.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How to tell what coils to order.

    I need to buy new coils for my 80 450S I have been repairing them as much as possible but it has come time to just buy new ones. I was planning on going with Dyna coils as most people in the discussions have sais they are good one to buy. Do I need to measure the resistance of the ones I have to be able to get the right replacements? If so how do I go about doing that I have a mulitmeter? Just a little digital Harbor Freight thing it has Ohms on it I mostly use it for voltage and checking continuity. Never measured resistance before.

    #2
    you just need to know whether you have a points, or electronic, ignition....5 ohm coils for points, 3 ohm for electronic...I believe you have an electronic ignition

    Comment


      #3
      Order 3 ohm coils. They will work perfectly on either electronic ignitions or points ignitions. You want NON CDI coils.

      Earl
      Komorebi-The light filtering through the trees.

      I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

      Comment


        #4
        CAUTION the 3 ohm dyna coils are for an I4 not a twin CHeck for coils on www.jcwmotorcycles.com for a generic coil

        Comment


          #5
          check JCW pn AGQ024256b twins that require 2 seperate coils

          Comment


            #6
            EBAY http://cgi.ebay.com/ebaymotors/ws/eB...537337100&rd=1

            Comment

            Working...
            X