Announcement

Collapse
No announcement yet.

Pilot screw setting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Pilot screw setting

    Hi eveyone,

    I just finished rebuilding the carbs on 82 GS850L. What is a good starting point to set the pilot screw?

    #2
    Usually 1.5 turns out is where I have been told to start at.

    Comment


      #3
      Re: Pilot screw setting

      Do you mean the mixture screw that is located on top of the carb intake on the engine side? On my 1150, mine is set to 2 1/4 turns out.

      Earl

      Originally posted by Jerry Carne
      Hi eveyone,

      I just finished rebuilding the carbs on 82 GS850L. What is a good starting point to set the pilot screw?
      Komorebi-The light filtering through the trees.

      I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

      Comment


        #4
        Thanks Earl, that's the one. I'll try around 2 as an average between you and Jay. Thank you both. Fingers crossed.

        Jerry

        Comment

        Working...
        X