Announcement

Collapse
No announcement yet.

Can you change fork oil w/o taking forks off????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Your drain screw, like mine I believe, is directly above the axle. take the two nuts off the buttom axle studs.
    Nope. The drain screw is a small Phillips head screw on the side of the fork leg. It is located just to the front side of the rebound adjuster housing, about midway up the bulge where the rebound adjuster is housed. The screw you are talking about is an 8mm (I think, going from memory here) socket head cap screw and it is the damper rod bolt that holds the damper rod in place inside the fork leg. Undo this bolt and your forks will fall apart. Which I gather is more work than you wanted to have on your hands at this point in time...


    Mark

    Comment

    Working...
    X