.png "Powered by vBulletin")
What have you guys used? A carefully placed paint scraper and work up all sides gently?
-
1982 GS1000S Katana
1982 GS1100E -
I used a butter knife!
Currently bikeless
'81 GS 1100EX - "Peace, by superior fire power."
'06 FZ1000 - "What we are dealing with here, is a COMPLETE lack of respect for the law."
I ride, therefore I am.... constantly buying new tires.
"Tell me what kind of an accident you are going to have, and I will tell you which helmet to wear." - Harry Hurt -
I grab it on opposite sides, squeeze in some, but mostly push sideways hard. If it's pliable enough, that creates a gap and/or raises it out of the groove far enough that I can push it up with my thumb and get it started.Comment
-
I have tried to remove it by hand but it doesn't really budge, I will try the butter knife it will have less of an edge than the paint scraper idea.1982 GS1000S Katana
1982 GS1100EComment
-
It might not be strong enough, but you might try a popcicle stick. It would be less likely to scratch the fork or damage the cover. I have a bag of them I use for all sorts of stuff...Comment
Comment