Just had a thought...

[Detman101]

Last year I switched to Dyna coils (3.0 OHM).
I never changed my sparkplug type or regapped them.

I read somewhere on here that people regapped or changed their sparkplugs when they went from stock to ACCEL brand coils.

Does the same thing have to be done for the Dyna coils?

My bike: 1981 GS750L(Mostly)

[Anonymous]

You shouldn't need to change the type, and regapping is not necessary, but you may see some benefits with a wider gap. It only takes 10 minutes to pull the plugs and regap them, so it's worth a shot. Try 0.035" and see if you notice any changes.


Mark

[Detman101]

Kewl, I'll try that Mark. Thanks!!!

[dgeorge]

You shouldn't need to change the type, and regapping is not necessary, but you may see some benefits with a wider gap. It only takes 10 minutes to pull the plugs and regap them, so it's worth a shot. Try 0.035" and see if you notice any changes.


Mark

If I'm not mistaken that is exactly what Earl recommended when I upgraded to the Dyna's. So definatly sounds like good advice.