What jetting would i need with this setup?

[Anonymous]

Hi there guys, I was wondering if you guys could help me out with jetting my bike.

85 gs700e, Its got a stock drop-in uni filter and a Kerker 4-1 header with a kerker k45 can that has been shortened about 3" and no packing.. the bike sounds AWSOME! btw.. everyone local tells me i need a stage 3 kit, is this true?

Thanks for your help!

P.S. any ideas on where the cheapest place to get the jet kit would be?
Thanks,
Jason.

[Anonymous]

No real help on the jetting specifics, but your set up should only require a Stage 1 kit. If you ditch the airbox for pods, then you will need the Stage 3 kit. Many of the Dynojet kits for our bikes come with both Stage 1&3 parts in them, so it may not matter which one you need, you will get both.

Mark

[Anonymous]

any pros and cons with going with the stage 3 kit with this setup?

[Anonymous]

any pros and cons with going with the stage 3 kit with this setup?

A stage 3 kit will not work correctly with the stock airbox, it is meant for pod filters and a less restrictive exhaust (than stock). With your set up it will likely be horribly rich in the mid-range and be a spitting, stumbling beast.

Mark