Announcement
Collapse
No announcement yet.
PLEASE HELP ME!
Collapse
X
-
Hoomgar
Originally posted by my98xplorer
-
my98xplorer
-
my98xplorer
-
daveo
there's no juice going from the starter button to the relay, so either the button's shot or dirty ,or, there's an open in the return wire
Comment
-
my98xplorer
I have about 10v going from the button to the relay. I checked it right before the relay and sure enough, you hit the button and juice goes through. Any other idea?? Im stumped!
Comment
-
daveo
Originally posted by my98xplorerI have about 10v going from the button to the relay. I checked it right before the relay and sure enough, you hit the button and juice goes through. Any other idea?? Im stumped!
Comment
-
my98xplorer
I jumped it from the 2 big terminals. There are only 2 on my relay, then the wire that comes from the start button it soldered on there.
This is what mine looks like. I just dont understand why it wont start the bike? I have power going to it, i have a good relay, there is power coming from the wire that comes from the start button, and when i touch the terminals together the bike turns over??
Comment
-
daveo
Originally posted by my98xplorerI jumped it from the 2 big terminals. There are only 2 on my relay, then the wire that comes from the start button it soldered on there.
This is what mine looks like. I just dont understand why it wont start the bike? I have power going to it, i have a good relay, there is power coming from the wire that comes from the start button, and when i touch the terminals together the bike turns over??
Comment
-
Hoomgar
Rock on, follow Dave buddy. Thx for picking up my trail Dave. Darn work keeps pulling me away from the more important things
Comment
-
my98xplorer
Ok i jumped it from the power terminal to the point where the start wire is soldered in and nothing. I have a hard time believing that the relay is bad, this is the 3rd one ive tried and i also used a couple of normal 12v relays to see if they would work and nothing. Any more ideas?? Thanks a lot for all of your help!
Comment
-
Hoomgar
Sorry dood but that test is indicatiing a bad solinoid. It is not engaging. Did you test all three this way? Maybe you have more than one problem.
Comment
-
daveo
-
my98xplorer
Originally posted by daveoyou DID have the solenoid/relay grounded when testing....?
Comment
-
my98xplorer
-
my98xplorer
Comment