82' GS400L weird problem

[gspaul]

If you look at the bottom picture the inlet manifold's are at the front of the carb's, you can see the grove that the O ring sit's in,it stop's air leak's between the carby and motor, if you get leak's there you can never get your mix right.
No prob's, glad to help.

[Anonymous]

strange.. there aren't any screws on those rubber inlets. they're smooth all the way around.. i'm thinking.. there should be a screw on the carb itself. where the tubes plug into. I'll check them out.

[gspaul]

It could be those rubber manifold's are not stock,from memory all suzuki , kawasaki ,honda, etc, from that period had the vacumn take off in exactly the same place!
My bet is there off a single cylinder motor, because you don't balance one carb.
2 choices, buy new ones, or drill and tap what you have to fit whatever adapters you have.
Don't miss the metal when you drill!

[Anonymous]

wow thank you for your help.. i appreciate it

[gspaul]

That's ok,where about's on this planet are you anyway.

[Anonymous]

vancouver british columbia canada