Announcement

Collapse
No announcement yet.

Clutch arm position?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Well I've done some more reading here on the forum and I'm almost sure the clutch is stuck now.

    This bike was stored for at least two years, likey five or more, with no oil which seems to mean that the clutch is just going to be stuck. I'll drain the beasty and dive into the clutch later today.

    /\/\ac

    Comment


      #17
      Got the camera sorted. Here's the older style clutch lever with bottom adjustment on the cable.

      Cable to lever angle should be at or a little past 90 degrees.

      Pete

      Comment


        #18
        Originally posted by Pete Logan
        Got the camera sorted. Here's the older style clutch lever with bottom adjustment on the cable.

        Cable to lever angle should be at or a little past 90 degrees.

        Pete
        Woah, different from ours. How's the insides work?

        Comment


          #19
          Far as I know, exactly the same. It's just two different ways of taking any slack out of the cable.

          Yours is easier to get at and faster to adjust. Maybe the race teams wanted it.

          Pete

          Comment

          Working...
          X