Announcement

Collapse
No announcement yet.

Rear Master Cylinder Assembly w/ Pics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rear Master Cylinder Assembly w/ Pics

    I am finally putting back together my rear master cylinder, but I have forgotten how it went. In the following picture, is everything in the right direction, especially the spring and piston. Also where does this rubber piece in the top of the picture go.



    Thanks,

    Brian

    #2
    What kind of GS? You can cross your parts with the image off a parts fiche on BikeBandit.com or AlphaSports.com

    jon

    Buy parts at a low price for your snowmobile here at Alpha Sports, we carry a LARGE variety of parts and accesories.

    16 KTM 1290 Super Duke GT with 175hp stock, no upgrades required...
    13 Yamaha WR450 with FMF pipe, Baja Designs street legal kit
    78 GS750E finely tuned with:

    78 KZ1000 in pieces with:
    Rust, new ignition, burnt valves and CLEAN carbs!

    History book:
    02 GSF1200S Bandit (it was awesome)
    12 Aprilia Shiver 750
    82 GS1100G

    83 Kaw 440LTD

    Comment


      #3
      The bike is an 80 GS 750L. I've went to both sites, but it is hard to tell from the micro fische which way the spring goes, along with the piston. Thanks for the idea though.

      Brian

      Comment


        #4
        The spring goes in first, the piston has a resess for the linkage so it will only go one way too

        Comment

        Working...
        X