Mark
Announcement
Collapse
No announcement yet.
HSR 42 turbo carb info. needed
Collapse
X
-
Kaptain Ketchup
HSR 42 turbo carb info. needed
Got my HSR fitted to my housing and now looking to do the proper jetting. I got a 32.5 pilot jet (to replace the 17.5 stock piece). The 32.5 did not go in smoothly and when I took it out it was all scored and broken. Looks like the fit was too tight for the bigger jet and its usless now.. What needs to be done to the casting (where the jet goes) in order to make it fit? Do I have to drill it out to match the jet diameter... or what. Any help is appreciated.
MarkTags: None
-
Kaptain Ketchup
P.S.
I cant wait till until I meet a V-rod on the street..... That was a classic debate for sure. I viewed from the sidelines the whole time, truely classic. Can't imagine what would have happened if the V-rod had won...
Mark
-
SqDancerLynn1
-
Kaptain Ketchup
I got the wrong style jet. There are two different jets and the one I got was for the Mikuni TMX (normally a dirt bike carb). Hopefully getting a new, proper, one isnt too much hassle. Sudco helped out lots. Thanks SDL1
Mark
Comment
Comment