Announcement

Collapse
No announcement yet.

HSR 42 turbo carb info. needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HSR 42 turbo carb info. needed

    Got my HSR fitted to my housing and now looking to do the proper jetting. I got a 32.5 pilot jet (to replace the 17.5 stock piece). The 32.5 did not go in smoothly and when I took it out it was all scored and broken. Looks like the fit was too tight for the bigger jet and its usless now.. What needs to be done to the casting (where the jet goes) in order to make it fit? Do I have to drill it out to match the jet diameter... or what. Any help is appreciated.

    Mark

    #2
    P.S.

    I cant wait till until I meet a V-rod on the street..... That was a classic debate for sure. I viewed from the sidelines the whole time, truely classic. Can't imagine what would have happened if the V-rod had won...

    Mark

    Comment


      #3
      I would suspect you got the wrong style of jet check with www.sudco.com for info

      Comment


        #4
        I got the wrong style jet. There are two different jets and the one I got was for the Mikuni TMX (normally a dirt bike carb). Hopefully getting a new, proper, one isnt too much hassle. Sudco helped out lots. Thanks SDL1

        Mark

        Comment

        Working...
        X