.png "Powered by vBulletin")
I have a set of cases that i need to have welded.I talk to a welder about welding it and he ask me how much magnesium they have in them.Just wondered if anyone knows?
-
-
It appears the answer is no.
Did you ever find out?
-
very good prep and jbweld or equivalent cold weldComment
-
Well, there aluminum cases......
edit, this post is from 2005!Comment
-
i wouldnt jb them unless i had no other altermnative, welding- im pretty sure there aluminum alloy, no magnesium in them, un like some dirt bike cases
i have welded aluminum d b cases , prep it weld it finish propperly ,and you might not ever know they were welded
or find someone cool on ebay and get different set,
Comment
-
I think it's amazing that the guy that started this thread has been a member since 2002 and with seven posts he still has an active account.
LURKER!!!
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
From everything I have read, heard or seen this is a pretty easy way to go. Requires an accetelyne torch for a engine case.
.png)
This stuff comes highly recommended
Comment
Comment