Announcement

Collapse
No announcement yet.

Cheap pistons for GS 1000?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cheap pistons for GS 1000?

    I tore the head off my bike today and am realizing where my ticking sound is coming from. It's piston slap and with only 38000km. Any ideas where I could get a set of affordable pistons for my 78 GS1000. What kind of mileage would be considered worthy of looking into for a parts bike? The Wiseco pistons brand new are $800.00 cdn. plus I would have to overbore (another $250.00) and my cylinders are fine.

    #2
    $800 ??!!!!

    I found new OEM pistons for an 850 that ran $40 each with an additional $40 for a ring set. Try some of the parts links on this site before you shell out that kind of money. I wouldn't consider putting already worn pistons/rings in a bike - the rebuild labor effort is just too much.

    Ace.

    Comment


      #3
      the wiseco price includes the head gasket as well, but I doubt that lil bit helps with the price at all. might be worth it to raise compression a point if thats an option for you.

      otherwise OEM pistons and rings shouldnt be much worse for yours than mine, my dealer charged me 23 bucks apiece for ringsets, and I think the pistons were 40 bucks US ea. but cant remember, they mightve been less. I bought a vesrah full engine gasket set for 80 bucks from my local repair shop, and as long as thats all your problems it shouldnt be so bad.

      Comment


        #4
        Check out http://www.pro-flo.com/pro-flo_wisec..._bore_kits.htm they have the wiseco 1085 or 1100cc kits for $359.95. If you don't mind going bigbore this is the best price I have found.
        Feel The Pulse!

        1982 GS1100E with Tracy one piece body
        2007 Roadstar Midnight Warrior

        ebay cntgeek

        Comment


          #5
          A wiseco kit is a good investment if your bike has covered a high mileage and has worn bores. At 38,000km you won't have worn bores or pistons. You'll only need rings and the bores honed if even that.

          Comment


            #6
            10 years ago I went with the Wiesco kit because it was cheaper than OEM oversize parts.

            The 1085 kit is a good deal, more torque!

            I don't think the CND exchange rate is 50%!

            Try directly from Wiesco or Dennis Kirk or similiar mail order
            1978 GS 1000 (since new)
            1979 GS 1000 (The Fridge, superbike replica project)
            1978 GS 1000 (parts)
            1981 GS 850 (anyone want a project?)
            1981 GPZ 550 (backroad screamer)
            1970 450 Mk IIID (THUMP!)
            2007 DRz 400S
            1999 ATK 490ES
            1994 DR 350SES

            Comment


              #7
              I got a set of pistions, rings and base, head and valve cover gasket off ebay for $200. NOS.

              Comment


                #8
                All good advice.

                Also try Orient Express in NY.

                I got psitons and valves from them for my 1000
                Keith
                -------------------------------------------
                1980 GS1000S, blue and white
                2015Triumph Trophy SE

                Ever notice you never see a motorcycle parked in front of a psychiatrist office?

                Comment

                Working...
                X