Engine Swap Clarification

[Anonymous]

I am new to the GS Forums (this is my first post).

I have searched and read quite a bit on these forums and found them to be a wealth of information.

My question is will a GS 1100 motor fit into a 1982 GS750E with little difficulty.

I have read about concerns with the smaller 1983 GS750 motor but from what I have read the Gs1100 motor will bolt easily into my GS750E. Is this infact accurate?

Thanks in advance for the help

[SqDancerLynn1]

Check the old school site under 7/11

http://www.oldskoolsuzuki.info/index.htm?fastcat/library/library.shtml~main

[Anonymous]

Thanks,

i have looked at this site...but I can find nothing about the year of frame I am looking to put a GS1100 engine into....unless I missed it.

The link you gave to the archieve has no files in it any longer.


So does anyone know if a GS1100 engine will fit into an 1982 GS750E?

Thanks again.

[SqDancerLynn1]

One of the posts from the site, You just need to figure out how to navagate it.

Gallimimus


Gender:
Posts: 83



Re: 1985 EFE engine in GSX1100 1981 frame?
? Reply #1 on: 07/15/05 at 18:14:36 ?

--------------------------------------------------------------------------------
I'd fitted efe motor in to my 81 750 katana frame. It all bolted up only had to make botom engine mount . and used the 750 wiring an pick up

[Anonymous]

Once again thank you.

I followed the link to the .ifo section and found more info.

It looks like the GSX1100 will then fit into a 1982 GS750E frame.

Or did I read that wrong?

Oh well thanks for the new ionfo and site.