Announcement

Collapse
No announcement yet.

Carb Sync Article

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Sync Article

    Awhile back ago I read an article on this site on how to (bench) sync your carbs when I was rebuilding my GS450ST. At that point I didn't need it but now that I am rebuilding a GS450GAF I am in need of the article and unable to find it. I have tired the search feature but it brings up alot of results and I am about 1/4-1/2 of the way through them.


    Isn't that the way it goes when you don't need it you can find it but when your looking for it b/c you need it you can't find it?

    #2
    Re: Carb Sync Article

    Originally posted by jayrbaker
    Awhile back ago I read an article on this site on how to (bench) sync your carbs when I was rebuilding my GS450ST. At that point I didn't need it but now that I am rebuilding a GS450GAF I am in need of the article and unable to find it. I have tired the search feature but it brings up alot of results and I am about 1/4-1/2 of the way through them.


    Isn't that the way it goes when you don't need it you can find it but when your looking for it b/c you need it you can't find it?

    Would this be the one you are looking for?



    It shows carbs for an inline 4, but your twin should be simular.

    Amos

    Comment


      #3
      Better than the one I was thinking of. Thanks.

      Comment


        #4
        Here is a thread that tells you how to sync the carbs on a 450 with out a guage.

        Comment

        Working...
        X