Announcement

Collapse
No announcement yet.

Gas in the crankcase oil - again!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Well Mark, all I can say is once you learn to manage your Pingel, you're going to be a happy man. :-) :-) :-) My Pingel and I are good friends. :-)

    Earl

    Originally posted by Hoomgar

    And I have been converted, finally. It is going to happen. I have 15 miles on the oil in that engine and it is filled with gas! Again! I can't deal with this.

    I am going to have to learn to turn fuel on and off now.

    Thanks again.
    Komorebi-The light filtering through the trees.

    I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

    Comment


      #17
      Originally posted by earlfor
      Well Mark, all I can say is once you learn to manage your Pingel, you're going to be a happy man. :-) :-) :-) My Pingel and I are good friends. :-)

      Earl

      Originally posted by Hoomgar

      And I have been converted, finally. It is going to happen. I have 15 miles on the oil in that engine and it is filled with gas! Again! I can't deal with this.

      I am going to have to learn to turn fuel on and off now.

      Thanks again.
      I can see that now. Very clearly Earl. Can you point me in the right direction to get one for my 78 GS1000? What do you recommend?

      Comment


        #18
        i HAVE A pINGEL ON MY SUZUKI AND MY kAWA. tHE BUELL HAS A STANDARD SHUT OFF VALVE ON IT STOCK. vERY EASY TO OPERATE THE PINGELS.

        Caps

        Comment


          #19
          I love my stock petcocks. I would never remember to turn off my petcock everytime I shut down. I would just as well set a bucket under the carbs.
          Believe in truth. To abandon fact is to abandon freedom.

          Nature bats last.

          80 GS850G / 2010 Yamaha Majesty / 81 GS850G

          Comment


            #20
            Originally posted by dpep
            I love my stock petcocks. I would never remember to turn off my petcock everytime I shut down. I would just as well set a bucket under the carbs.
            That has always been my fear too Don. I am really thinking this through. But I want to do it. I just need a fool proof way to remember or the fool wont.

            Comment


              #21
              Originally posted by Hoomgar
              Originally posted by dpep
              I love my stock petcocks. I would never remember to turn off my petcock everytime I shut down. I would just as well set a bucket under the carbs.
              That has always been my fear too Don. I am really thinking this through. But I want to do it. I just need a fool proof way to remember or the fool wont.
              It becomes routine, on a bike with a manual petcock...... ignition off, kickstand down & petcock off before getting off the bike....or centrestand in your case, since thats what you prefer . Also annoying is forgetting to turn it back on & the bike cough & sputters just when you crack open the throttle to teach that punk in the cage at the first light :twisted: .



              Tony.
              '82 GS1100E



              Comment


                #22
                Originally posted by Hoomgar
                Originally posted by earlfor
                Well Mark, all I can say is once you learn to manage your Pingel, you're going to be a happy man. :-) :-) :-) My Pingel and I are good friends. :-)

                Earl

                Originally posted by Hoomgar

                And I have been converted, finally. It is going to happen. I have 15 miles on the oil in that engine and it is filled with gas! Again! I can't deal with this.

                I am going to have to learn to turn fuel on and off now.

                Thanks again.
                I can see that now. Very clearly Earl. Can you point me in the right direction to get one for my 78 GS1000? What do you recommend?
                This ain't Earl, this is the better looking guy. 8)
                Just go to their website and check out their valves.
                They come in different designs like, round body, hexagon body...They also come in polished aluminum or chromed. You need an adapter too. Measure the two bolts, center to center, that hold your petcock to the tank. You'll have to enlarge the hole the petcock goes into. Just a little, with a rat tailed file or ?, about 1/16" to 1/8" on each side. You shouldn't need to trim the valve fuel screen at all.
                Mine was about $90 including adapter/shipping.
                It's no problem remembering to shut it off after a ride. You just do it. Like we did with dirt bikes years ago.
                If you're serious, I'll look up my Pingel receipt for the P/N. I bought the round body, chromed. I also bought their fuel line. It's like surgical rubber or similar. Goes on easy and doesn't need clamps. Though I did use a tie strap on the carb end.
                Just click the WWW below if you want to see it. I have a pretty good shot of it in my pic' section.
                And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
                Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!

                Comment


                  #23
                  Its easy Mark. Just plant it in your mind the key no longer shuts the bike off.
                  To shut the bike off, you turn the petcock to off. When you leave the bike, youre going to take the key with you anyway. :-)

                  Earl

                  Originally posted by Hoomgar
                  Originally posted by dpep
                  I love my stock petcocks. I would never remember to turn off my petcock everytime I shut down. I would just as well set a bucket under the carbs.
                  That has always been my fear too Don. I am really thinking this through. But I want to do it. I just need a fool proof way to remember or the fool wont.
                  Komorebi-The light filtering through the trees.

                  I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

                  Comment


                    #24
                    Put a sticker on the Tach that says" turn your fuel off, Dummy!"

                    That should do the trick
                    1981 GS650G , all the bike you need
                    1980 GS1000G Power corrupts, and absolute power corrupts absolutely

                    Comment


                      #25
                      Or rig an alarm....when you turn key off...alarm sounds:

                      "Your fuel is ajar....your fuel is ajar" :roll:

                      Comment


                        #26
                        Originally posted by beby99
                        Or rig an alarm....when you turn key off...alarm sounds:

                        "Your fuel is ajar....your fuel is ajar" :roll:
                        ROFLMAO
                        1981 GS650G , all the bike you need
                        1980 GS1000G Power corrupts, and absolute power corrupts absolutely

                        Comment


                          #27
                          Seems like you need to find out for sure what is leaking. If the fuel is coming thru the vacuum hose, the needle & seats may not be leaking, but if the fuel from the pet cock is coming thru the fuel line, at least one of the needle & seats is leaking. If a needle & seat leaks, it leaks all the time weather the engine is OFF or ON. If you install a Pingle, it will stop the leaking needle & seat when the valve is off, but while the engine, and Pingle is on, the needle & seat will still be leaking.
                          1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                          Comment


                            #28
                            Put a kit in my vacuum operated petcock today. Took all of 10 minutes. I also have an 03 Intruder with manual petcock. Manual is OK till your needle & seat o-rings start to leak & you neglect to turn it off. Vacuum is great till you get a pin hole in the diaphram & it either won't open or starts sucking gas down the vacuum port. Point being, I have both & can't say that I prefer either so I'll just head in the general direction of keeping them both stock.

                            Comment


                              #29
                              This goes back to that adage of "Don't fix one problem with another"
                              Considering that kits for the petcock are available and cheap it is probably a good idea to change that diaphram every 20 years whether it needs it or not. Then you don't have to worry about it until 2025.
                              1981 GS650G , all the bike you need
                              1980 GS1000G Power corrupts, and absolute power corrupts absolutely

                              Comment


                                #30
                                To vaccum or not to vacuum.

                                Originally posted by dpep
                                I love my stock petcocks. I would never remember to turn off my petcock everytime I shut down. I would just as well set a bucket under the carbs.
                                I agree with dpep. I'm doing good when I remember to put my kickstand down, I'll never remember to do two things. I have had only one catastraphic failure in 25 years, I am willing to chance one more in the next 25 year for the sake of convience.

                                Comment

                                Working...
                                X