Announcement

Collapse
No announcement yet.

82 gs850 16kmi - update on carbs, regulator etc.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    82 gs850 16kmi - update on carbs, regulator etc.

    Yesterday, I did the weather stripping on the air filter and to night the bike fired up right away. The throttle response sucked but it ran. THE AIRBOX SHOULD BE TIGHT!!!. Second problem I found was the petcock vaccume diaphram unit was a little loose. Tightened it up and a little more improvement.

    Tonight I brought home 4ft vacuume and fuel lines and hung the gastank from a ladder. My idea was to try to adjust the idle air jets to see if that was the running problem. Once I got past the above problems, it seemed ok. I rode the bike around the neighborhood.

    The performance really sucks but it does ride. I wouldn't take it out on some streets, but putt.

    I did find not voltagevariation at the battery terminals so I'm beting the regulator is bad as well. This bike really is a boner.

    So I have bad performance, bad charging, and a somewhat bad attitude. I may still have to pay for the smooth running performantce part but, it should be able to be worked on now.

    Still need a REAL air filter element, a compression check, plugs, and regulator/ or hopefully not stator.

    thanks for reading.
    mike

    #2
    Replace the air filter !!!! before trying to tune

    Comment


      #3
      As SDL said,plus make cartain your valve clearences are correct before carb tuning.

      Comment


        #4
        yep, this week is air filter, plugs, and probably honda regulator as soon as I figure out if the stator is good. Oh yeah, those vent tubes... they will be history when I get home tonight!


        mike

        Comment


          #5
          Im not sure theyll make the huge improvement on the 850 if everything else is right.

          I just went through a "boner" of an 850, end result is it now runs great and has vent tubes still installed.

          it too tried my patience but Im very happy now that I did it.

          Comment


            #6
            something like day 12... it continues:

            140 psi for each cylinder
            The rr seems to be charging
            vent tubes came off [but I haven't ridden it yet]
            today gets new plugs[got one in my pocket and wally world is next door]
            Local bike shop has uni filter sheet for close to real air element.



            gulf coast texans -> good luck and hang in there!

            mike

            Comment

            Working...
            X