Turn Signal Piece

[lukehan]

Hi,
Ever since I bought my 79'gs850 it has had a vetter hard luggage rack on it. I decided recently to take it off and put it back to stock. I have almost everything I need, but I am missing two little pieces that I am not sure where to find, I can probably make some, but I figured I would check with you guys first. In the picture below it is what fits around the mounting bolt that comes out of the turn signal body, I am guessing it is a little hard plastic piece with a round base and a square body that fits into the rubber mounting piece #18. It is what keeps the turn signal from rotating. Any ideas where to find a couple of these?

thanks

Luke (sorry for the extremely long link)

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~mp_id~~mscssid~U5CUFE6N2QTS9LR21EBPLGGQ6B9N2W9D~schem_dept_id~1004394~section_dept_id~1~section_dept_name~OEM+%28Stock%29+Parts~dept_type_id~2~model_dept_year~1979~model_dept_mfr~Suzuki~model_dept_id~987836~model_dept_name~GS850GN.asp

[FTGRET]

The bracket is stamped steel. Put a post in the parts wanted or find someone who is parting out a bike. Worst case, buy them new.

[lukehan]

I already have #23&24 in the picture, what I need does not have a number.

Luke

[beby99]

I believe the part you are talking about is glued/molded to the turn
signal. You would have to get the whole signal...check ebay.

[mixongw]

I replaced my broken turn signals recently. I think I may have what you need. I'll get back to you.

[Clone]

What are you going to do with the bags?

[lukehan]

I'm keeping them, I just like the look of my bike better stock and I'll put them back on for long trips, but I have a tank bag for short trips. I do have a complete front fairing/windshield for a 79' gs850 that I don't want anymore, it even has an air horn.

Luke