need a picture of

[Anonymous]

anyone have a picture of the cdi box on there bike?i need to see what wires go to what conectors please help i need to ride


thanks
tony

[Billy Ricks]

What model?

[Anonymous]

picture

well that would sure help.it is an 83 gs750es i do believe

[Billy Ricks]

Just happens to be the same as mine. If the plugs haven't been butchered they should just plug in. If you need to know what wire goes to each pin then here it is.

If you have the ignitor mounted on the bike the socket on the right side of the ignitor will have,

Right front pin Blue
Right rear pin Yellow

Left front pin Green
Left rear pin Black

The socket on the left side of the ignitor will have,

Right front pin Orange with white tracer
Right rear pin Black with white tracer

Left front pin White
Left rear pin Black with yellow tracer

[Anonymous]

picture

thank you so very much that is what i needed to know now i have one more question is there two empty pins on the left conector.seem to be the two middle pins.last question ...







i hope
thanks
tony

[Billy Ricks]

Nothing gets hooked up to the middle pair.