GS #630 to #530 Conversions...correction

[earlfor]

There was a list of bikes that used the same rear sprocket hole lug pattern posted maybe a year ago on the boards. In that list the GSF1200 Bandit was included as fitting GS model. I recently ordered a bandit sprocket and it does NOT have the same lug pattern as a GS. Bandit front sprockets will fit the GS line, but bandit rear sprockets do NOT. Also, when fitting a Bandit front sprocket, a 5mm spacer is required, Not a 6 mm as normally assumed. A 6mm spacer will not allow space for the splined washer to lock onto the countershaft

Earl

[DMPLATT]

So, I guess you are going to Buy a Bandit to fit your rear sprocket?

Problem solved. :P :twisted:

[earlfor]

Hmmm, good idea. :-)

Earl

So, I guess you are going to Buy a Bandit to fit your rear sprocket?

Problem solved. :P :twisted:

[Billy Ricks]

Just check out some of the wheels on Ebay to see which ones use the 6 hole sprockets. There are some years and models that use 5 hole and some use 6 hole sprockets.

[DMPLATT]

Just check out some of the wheels on Ebay to see which ones use the 6 hole sprockets. There are some years and models that use 5 hole and some use 6 hole sprockets.

Hmm, I like my idea better. :twisted:

[DMPLATT]

Hey Billy, while we are on this subject. Earl and I were PM'n and I seem to remember that you did a front end swap? Was it a Gixxr swap?
What other mods did you take from the newer bike?

Thanks.