QUICK supertrapp gs750 header question

[fastpakr]

Ending in less than 50 minutes, so I need a quick answer. Would this fit my '82 750? I can't find the p/n he lists on Google, and Supertrapp's site doesn't seem to list older applications, so I don't know if this is for the 8 or 16 valve 750 motors. Also, what's the best source for cans that would fit it? I've got a rusty version of this exact system, but the muffler needs to be replaced. I'm hoping to save a bit of money by getting this and a can separately to go with it, if anybody has some ideas. Thanks!

[Griffin]

No, it will not fit your '82. The '83-'85 GS750/700s have much physically smaller engines.

[fastpakr]

Interesting, I knew they were lighter but not that the bore spacing had changed.

[Griffin]

Center to center distance from number one to four exhaust ports on my 700 is about 12.75", the same as on the original GSXR air/oil cooled engines.

I believe your engine will measure close to an inch wider.

[fastpakr]

Thanks, I'll take a look later to confirm that. I appreciate your help.