your help again is needed...

[Bikervix]

Hi again

Im sorry to be a complete numpty............. BUT.........please can you help me.

This is for Montizano....and for my ever growing knowledge.

We know its the coil that is the problem with the bike.....Someone has pinched it.

I know that I have to buy a pair, because if they dont match it could fry the cdi.

I know that the resistance should be about 3 - 5 ohms. (God that disc manual I got is brilliant lol)

BUT !!!!!!!!!!!!!! here is where I really need your help.

Ive seen on ebay a pair of coils off a GS1000.

Have also just seen a coil off a GS 750 but 1977.

Would these be any good? or do I need to find a GS 750 es 1983 pair?


If you could help me id be so very grateful.

[crc1214]

Check on www.bikebandit.com or www.crotchrocket.com

Look at the part number they have listed for your coils. Then look at the part numbers listed for the GS1000 and 77 GS750 coils.

If they are the same, they'll work.

Pretty much any coil from any 4 cylinder GS (or any of the Big 4) will work, but some will require modification to the connecting wires and mounting brackets.

Hope this helps, and good luck.

[gke84]

your help again is needed

I installed coils from a 2002 katana gsx 600,on a 1984gsk 1100.they work perfectly.they should work for your bike too.i paid 28.00 dollars on ebay.why get 20 year old coils when you can get newer ones for the same price or lower.maybe someone else can chime in and say if they would fit your bike.

[focus frenzy]

the 83 750 es uses the late model small coils, early model jumbo coils may not fit.

[SqDancerLynn1]

The newer bikes all use the smaller size coils You can use any of the coils from a Bandit, 90's GSX, RF almost any of the I4 motors

[Bikervix]

Thanks

Thanks very much,