Announcement

Collapse
No announcement yet.

2ND Dumb question = How to get on center stand

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    2ND Dumb question = How to get on center stand

    83 GS1100E. How is the best way to get one the stand. I try about ten times and then just go have a beer. It must be my technique. Any help would be appreciated. It seems like it should be easy.
    TIA
    Mike 8O

    #2
    center stand

    sometimes it helps if you take the side cover off so you can get a good grip on the frame. The key is to do it in one motion and not lose momentum, oh and make sure you stand on the little tab for standing on.

    The first couple of times will be awkward, but I have seen guys that weigh 140 do it with ease

    Comment


      #3
      Lock your arm and use the straightening action of your leg to lever (as opposed to lifting) the bike up.

      Comment


        #4
        Joed has it about right. I'm used to it so I don't really think about it, I just do it and it works everytime.

        Jon Kram
        _______________________

        81 GS750EX and proud of it!!

        Comment


          #5
          for a question that you think is dumb it surely gets asked over and over. my soluion was to remove the thing and trash it

          Comment


            #6
            I would keep the centre stand. They are great for checking your tires and all kinds of things. Check in the Just for Ladies section for this discussion. It was also brought up here earlier in the year.

            Steve

            ps. My GS400 takes more effert than my GS1100 to put it up on its centre stand.

            Comment


              #7
              Left hand on the left grip, right hand on the grab rail under the seat, right foot on the centerstand, then give it a good jerk backwards. Use your legs as much as possible.

              Comment


                #8
                Billy's got it to a "T".....I use the same way to get mine on.

                Comment


                  #9
                  for a question that you think is dumb it surely gets asked over and over. my soluion was to remove the thing and trash it

                  ...which is a dumb thing to do, Scotty, especially to one of your beloved chain-driven bike.



                  N

                  Comment


                    #10
                    Pushing with your foot is as important as pulling back/up.

                    Comment


                      #11
                      Mike
                      I posted this previously, so I'll just copy it here.
                      I have a couple of herniated disks, so my method
                      is likely a bit different than most people's. :-)

                      With the bike sitting on level concrete or asphalt, I stand on the left side of the bike. Left hand on the left handlebar grip, right hand on the right lower edge of the seat. Stand the bike vertical. Place your right foot back slightly so that you have both hands and your right foot making a stable tripod. You will need for a moment to be able to hold the bike steady with two hands while standing on only your right foot. Lift and place left foot on the centerstand and push it down until it touches the concrete. Rock bike slightly so be sure you have both sides of the centerstand in contact with the concrete. Step down with all your weight on your left foot. Your right hand should be on the left side of the seat aprox above the right rear shock. STILL holding presssure with your left foot on the centerstand. The bike will stay steady, Now, place your left hand on the left underedge of the seat above the left rear
                      shock absorber. You will now be holding the bike steady with the presssure of your left foot on the centerstand and you will be standing next to the bike and beside the rear shock on
                      the left side. Your left leg will have a slight bend in it. At the same time, straighten your left leg and pull back and only slightly upwards with both hands. The bike will come up onto the centerstand verRRy easily. :-) :-)

                      Earl
                      Komorebi-The light filtering through the trees.

                      I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

                      Comment


                        #12
                        Thanks Earl, This is a great move for Twister!

                        Comment


                          #13
                          Originally posted by Nick Diaz
                          for a question that you think is dumb it surely gets asked over and over. my soluion was to remove the thing and trash it

                          ...which is a dumb thing to do, Scotty, especially to one of your beloved chain-driven bike.



                          N
                          Nick After I lowered the bike the thing would have had to been modified along with the kick stand. I have a motorcycle jack any how.
                          My rear rim and chain guard are still as oily as ever

                          Comment


                            #14
                            Hi all. Thanks for all the tips. I found that my center has a bent pad on the right side. When the bike was straight up the center stand was not touching the ground on both sides. I guess I was trying to lift it on one leg of the stand. I found if I lean it a tiny bit more it stabilizes itself and I can pop it right up with the right leg. Thanks for all the help.
                            Mike 8O

                            Comment


                              #15
                              After I tried a dozen times, my old dad showed me how to get it on the center stand. He did it with such ease I thought he was a magician. Now, I too am a magician. I love the center stand.

                              Comment

                              Working...
                              X