Will an '82 1000 Katana exhaust fit on an '83 1100 engine?

[timinator]

I'm looking to buy an exhaust for an '83 1100 Katana and found one from an '82 1000 Katana. (It's aftermarket) Are they interchangeable or are the heads different?

[earlfor]

Re: Will an '82 1000 Katana exhaust fit on an '83 1100 engin

82 and 83 are both 16 valve heads. I havent done that swap, but I'm pretty sure they would match up. I believe the only change made between them was a bore increase. Exhaust ports were unchanged as far as I know. Hanger brackets for the mufflers could be different...not sure.

Earl

I'm looking to buy an exhaust for an '83 1100 Katana and found one from an '82 1000 Katana. (It's aftermarket) Are they interchangeable or are the heads different?

[danbouck]

I actually think that the exaust ports did change for 83' but I'm not 100% sure

[Billy Ricks]

As far as I know the ports should be the same. In '83 the 750 ports did get smaller. I tried an 1100 pipe on my '85 700 once and it didn't fit. The 1100 pipe was too big at the ports.

[Robert Corrie]

It WILL fit .