Cam degreeing done

[Einar J Skog]

Hi

I was degreeing the cams on my GS1000GL yesterday...
The intake was at 100 and the exhaust was at 103.????
Belive the spec. says 109 on both ???
I put both on 107~108....

I will take a Dyno test of the bike in late mars,when the riding season starts here in the south of Norway.

GS1000GLx
(1100 wiseco--KN filter--Dynojet stage 1--Lazer competition 4-1 exhaust)

[scotty]

Re: Cam degreeing done

Hi

I was degreeing the cams on my GS1000GL yesterday...
The intake was at 100 and the exhaust was at 103.????
Belive the spec. says 109 on both ???
I put both on 107~108....

I will take a Dyno test of the bike in late mars,when the riding season starts here in the south of Norway.

GS1000GLx
(1100 wiseco--KN filter--Dynojet stage 1--Lazer competition 4-1 exhaust)

good luck in a very worthwhile project

[hp1000s]

Where can I get good technical info on the cam-degree process re: '79 1000s. This is some thing I'm gonna' check-out while my bike is torn down. Thanks,
Hugh

[scotty]

Where can I get good technical info on the cam-degree process re: '79 1000s. This is some thing I'm gonna' check-out while my bike is torn down. Thanks,
Hugh

PETE HEDMAN IN SWEEDEN (((BIKER66)) Has a detailed cam degreeing instruction posted. Lots of other stuff too. I lost the link though..
here it is

http://medlem.spray.se/biker661/index.html

[hp1000s]

Thanks, Scotty!

Hugh