Earl
Announcement
Collapse
No announcement yet.
What battery to buy?
Collapse
X
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
Charging rate and electrical system condition have much more to do with battery life than the type of battery. I've had the same sealed gel battery in the 1150 for about 3 1/2 years.
Earl
Originally posted by Joe NardyKomorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
-
Originally posted by PlanecrazyJoe, when you decide let me know. My battery (YB14L-A2) is completely dead, so maybe we'll order together and save some $$.
Regards,
JoeIBA# 24077
'15 BMW R1200GS Adventure
'07 Triumph Tiger 1050 ABS
'08 Yamaha WR250R
"Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."
Comment
-
kalessin
By the by, Sears Die-Hard motorcycle batteries are made by Yuasa. $34.99 for the YB14L-A2 for my GS1100GL, but everything seems to be more expensive around Boston.
Comment
-
Planecrazy
Bought my last battery from Sam's (mid summer last year), and will probably do it again ... however I just discovered that for some reason three of my six cells are low or dry, so I'll refill and see if the battery takes a charge. I see no reason why it shouldn't, but I definitely have to investigate why they lost fluid in the first place.
I forgot to unplug the fairing at the end of the season, so the phantom power for the radio killed it, but I thought the trickle charger would bring it back. I kind of doubt it would boil off the fluid, but who knows... I'll let you know what happens... By the way, I have no idea if the battery boiled off while I was riding or after I plugged in the trickle charger.
Update 3/28 ... I took another look (with a bright flashlight this time) and discovered that my battery DID have fluid in all three of the chambers that I originally thought had boiled off, so I'm back to having just a dead batter with no mystery to solve...
Regards,Last edited by Guest; 03-28-2006, 02:06 AM.
Comment
-
RobGS850L
-
Boondocks
Originally posted by Joe NardyAfter listening to opinions and gathering info I went with the $30 Interstate brand from Sam's Club. Gel types run $60-$65 and don't last twice as long as standard types. Since I run PODs it is very easy to check and fill my battery so maintenance isn't much of an issue. My bikes are garage kept and I charge the batteries before storage and again in spring. I just couldn't justify twice the cost.
JoeOriginally posted by BoondocksI recently bought a Lynn Vick WP14L-2 Sealed AGM Battery at Chaparral Motorsports for $43.99...
Comment
-
Planecrazy
Well, I went the BatteryMart route, and ordered a "Big Crank" for $58 including shipping.
The Sams's Club battery I bought last summer should have lasted longer than six months, and I don't feel like dealing with the acid / vent tube issues anymore...
If I had looked a little closer I MIGHT have decided to spring for the $65 Yuasa, only becuase it advertises 10 more CCAmps than the others (200 vs 190), and it advertises one year free replacement warranty.
I think I'll do just fine, though, with the one I ordered...
Regards,
Comment
-
J_C
Originally posted by BoondocksI recently bought a Lynn Vick WP14L-2 Sealed AGM Battery at Chaparral Motorsports for $43.99. I added a Battery Tender Plus for $34.97, five Hiflofiltro Oil Filters @$3.99 each (filters come with 2 O-Rings), and a rear axle clip for 1.69 to bring the total to $100.60. Orders over $100 ship free.
The battery was shipped fully charged, and it works fine. One thing that I did notice is that the packaging listed the battery as 12 AH. The battery configuration chart that I used to order this battery shows a WP14L-2 as being 14AH with 190 CCA. It's a size match for the YB14L-A2. I'm through with flooded batteries, no matter the price. Not ever having to check the electrolyte, greater reliability and longer battery life is worth the extra price to me.
Comment
-
Boondocks
Originally posted by J_CBoondocks, are you happy still with this battery? I need to replace my YB14L-A2, but I wasn't quite sure what you meant in terms of 12AH vs 14AH. Trying to decide if I can save money on this one or if I'll need to buy a more expensive yuasa or similar. Thanks!
Comment
-
J_C
Excellent, thanks! My brand new (to me) GS won't start without a jump from a car, and then it won't idle except on full choke. I figured it's definetely time for a new one. Cheers for the help!
Comment
-
Originally posted by J_CExcellent, thanks! My brand new (to me) GS won't start without a jump from a car, and then it won't idle except on full choke. I figured it's definetely time for a new one. Cheers for the help!
The starting problem is probably battery related. The full choke problem is most likely dirty carbs. I've been there myself...........
Thanks,
JoeIBA# 24077
'15 BMW R1200GS Adventure
'07 Triumph Tiger 1050 ABS
'08 Yamaha WR250R
"Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."
Comment
-
J_C
Thanks Joe. I've read a lot in here that it won't idle without a good battery. Since battery is my first task, and carb cleaning/rebuild is up next, I figure I'll nail it either way
Comment
-
mixongw
-
Planecrazy
Comment
-
Planecrazy
Installed it ... turns the bike over quite nicely (although it doesn't want to start -- doh!) One thing you'll want to check is what the terminals look like. On my new battery the terminals are set up to be used in several different configurations (top or side post installation), but because of this they don't allow the original rubber boot to fit over the positive connection.
This isn't a big deal for me, as I can easily fabricate a protective boot, but if you're picky you'll want to make sure the terminals match those of the original...
Regards,
Comment
Comment