Announcement

Collapse
No announcement yet.

what chain?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    what chain?

    does anybody know what drive chain to use for a 1983 gr650? size and links. where is the cheapest place? somebody's got to know where to find a chain for an 83 suzuki 650
    Last edited by Guest; 04-03-2006, 09:34 AM.

    #2
    if I put gs650 does it help

    Comment


      #3
      I just go to my dealer and have him get me one. You most likely have a #630 chain and sprockets, not common for todays bikes, so it will probably have to be ordered. Get a 120 link chain and use a bench grinder to grind the pins off to cut the chain. Make sure they either get you a chain press tool or a clip style master link, sometimes they don't come with the chain. If your current chain is severely worn, buy new sprockets as well (personally, I would never replace a chain without both sprockets as well) or you will get about 100 miles before your new chain will be as worn as your old one.
      Currently bikeless
      '81 GS 1100EX - "Peace, by superior fire power."
      '06 FZ1000 - "What we are dealing with here, is a COMPLETE lack of respect for the law."

      I ride, therefore I am.... constantly buying new tires.

      "Tell me what kind of an accident you are going to have, and I will tell you which helmet to wear." - Harry Hurt

      Comment


        #4
        GR650 most likely uses a 530 chain since those bikes make less than 50 hp. Bike Bandit sells a low buck RK chain for about $28 which would work fine. You might also want to change the sprokets as well. Check out the JT brand on Bike Bandit since these are the cheapest going. http://www.bikebandit.com/partsbandi...ion_Path~3.asp

        Good luck.

        Ed
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Indeed, the question is not what chain, but what bike!

          The 1983 Suzuki GR 650 is a twin cylinder bike called "The Tempter", it uses a #530 chain of 104 links. The front sprocket came stock with 15 teeth, the rear had 38.

          The cross reference I have, which is from the Dennis Kirk catalog, only shows a listing for GS 650E chain and sprockets available for the years 81-82. It uses a #530 chain of 106 links a front sprocket of 15 teeth and a rear of 45.

          So what have ya got, a twin GR or a four cylinder GS?
          Last edited by Guest; 04-03-2006, 12:14 PM.

          Comment


            #6
            I think he's got a GR....Found another post from him asking about a starter
            for a gs650 2 cylinder:

            http://www.thegsresources.com/_forum...ad.php?t=88265

            Hey Chevy...if its the "Tempter" you have than you might want to go
            one tooth larger on the front sprocket...(you will be glade you did).

            Comment


              #7
              thank you very much. ordered one from moto-chains

              Comment


                #8
                Hey Chevy....which is it a GR or a GS?

                Comment


                  #9
                  I thought it was a gs, but it's a gr. I belongs to a friend

                  Comment

                  Working...
                  X