Thanks
Announcement
Collapse
No announcement yet.
Fork Brace
Collapse
X
-
akreider
Fork Brace
Ok my bike does not have a fork brace on it and I was wondering if I should get one for it. I figure that its purpose is the stiffen up the front end to add stability or something. But does it make a big difference to ride without one?
ThanksTags: None
-
Boondocks
Originally posted by akreiderOk my bike does not have a fork brace on it and I was wondering if I should get one for it. I figure that its purpose is the stiffen up the front end to add stability or something. But does it make a big difference to ride without one?
Thanks
It might be hard to find a new fork brace now for these old bikes, but you might find a used one.
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17457
- Indianapolis
A German company called Telefix still makes fork braces for most GS models, and you can get them in the US through a company called Spec II for $129.95:
spec II, expansion, chambers, sprockets, tuning, motorcycles, handlebars, bearings, bushings, swingarm, reed, cages, fairing, chassis, clip-ons, clutch, kit, coils, RD, RZ, RZ350, RD350, RZ350, RD400, Daytona, Yamaha, steering, damper, brake, discs, engine, parts, fenders, carbs, carburators, flatslides, Mikuni, jets, main, Kawasaki, handgrips, buttons, Honda, Kawasaki, Hawk, brake, lines, stainless, steel, braided, pads, piston, powerjets, rearsets, porting, crank, work, shocks, Fox, slip-ons, YSR50
I would say that a fork brace would be the finishing touch to a thoroughly optimized suspension -- the final step after upgraded shock(s), fork springs, fork oil (you'll have to experiment with different weights), proper setup (THE most important step), and possibly Race Tech Gold Valves in the fork.
With simple updates and proper setup, GS suspensions can be quite good -- light-years better than the usual sad state you see of sagged, worn-out shocks and fork springs. At that point, it's time to think about a fork brace.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
Boondocks
Originally posted by bwringerA German company called Telefix still makes fork braces for most GS models, and you can get them in the US through a company called Spec II for $129.95:
spec II, expansion, chambers, sprockets, tuning, motorcycles, handlebars, bearings, bushings, swingarm, reed, cages, fairing, chassis, clip-ons, clutch, kit, coils, RD, RZ, RZ350, RD350, RZ350, RD400, Daytona, Yamaha, steering, damper, brake, discs, engine, parts, fenders, carbs, carburators, flatslides, Mikuni, jets, main, Kawasaki, handgrips, buttons, Honda, Kawasaki, Hawk, brake, lines, stainless, steel, braided, pads, piston, powerjets, rearsets, porting, crank, work, shocks, Fox, slip-ons, YSR50
I would say that a fork brace would be the finishing touch to a thoroughly optimized suspension -- the final step after upgraded shock(s), fork springs, fork oil (you'll have to experiment with different weights), proper setup (THE most important step), and possibly Race Tech Gold Valves in the fork.
With simple updates and proper setup, GS suspensions can be quite good -- light-years better than the usual sad state you see of sagged, worn-out shocks and fork springs. At that point, it's time to think about a fork brace.
Comment
Comment