Announcement
Collapse
No announcement yet.
The $3.50/gal Question
Collapse
X
-
GS JOETags: None
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
I dont believe the "O" ring seals in the carbs or petcock will tolerate that fuel.
Earl
Originally posted by GS JOEAre there any modifications that need to be done to run on 85 ethanol?Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
-
nuts930
I have been running 85 octane through my 850 for a year and a half and about 7,000 miles with no problems.
Comment
-
SqDancerLynn1
-
Boondocks
Originally posted by GS JOEAre there any modifications that need to be done to run on 85 ethanol?
As long as you are running a 10% max ethanol mix, there should be no problems and no modifications necessary. Ethanol, the alcohol made from grain, is not as corrosive to metals as methanol and is fairly kind to elastomeric materials. Methanol, commonly known as wood alcohol, should be avoided if possible. This is the more destructive type of alcohol, causing corrosion to some metal parts (i.e., aluminum parts such as carburetors) and damaging to rubber, polyurethane and most plastics.
I recently had an episode of pinging in hot weather and suspected the gas. I filled it with a different station's 87 octane regular with a 10% ethanol content. I normally would avoid this gas, but I wanted to test my theory of crappy gas in the tank. The pinging stopped. It isn't just a question of gasoline or an ethanol mix, but low quality below grade (octane) gas compared a higher quality (octane) product although both have the same octane rating.
Comment
-
RotaryRodder
-
Boondocks
Originally posted by RotaryRodderthe octane rating of E85 is up in the 100s.. i think the 85 means 85% ethanol.
As far as the 85% ethanol mix, some car manufacturers make E85 compatible cars, but no stock motorcycles can use it. It would take major modifications and testing to run an experiment on a motorcycle. Ethanol in that concentration will probably be corrosive to aluminum (carburetors) unless it is anodized. It might also have a detrimental effect on gaskets and other parts not designed for a high concentration of ethanol.
I wouldn't even consider it.
Comment
-
RotaryRodder
you pretty much will do the same work you would do to prepare for running alcohol. It can be done, but then you wont be able to run regular gas. The GM flexi-fuel cars have a computer controlled deal that can tell when its running what and alter the fuel system accordingly.
Comment
-
emjay
I read that E10 is the way to go if your motor is not designed for E85.
Comment
-
DanTheMan
Originally posted by nuts930I have been running 85 octane through my 850 for a year and a half and about 7,000 miles with no problems.
Comment
-
DIGHOUSE
With the removal of MTBE and replacement with ethanol it looks like there might not be any other options.
Comment
-
GS JOE
-
The ethanol conversion is going to screw us all.
1. No savings on energy since it still takes energy (including oil) to produce ethanol
2. Worse mileage. More fillups. Higher costs.
3. It must be trucked to refiners because they cannot send it through the pipelines due to water being absorbed. More costs and energy wasted.
4. The lovely ethanol lobby, led by ADM, has protection against foreign ethanol to the tune of 54 cents a gallon. That keeps competition out and prices high.
5. Ethanol went from 1.47 a gallon last summer to 2.77 a gallon now. So some geniuses thought it would be a cheap alternative to MTBE. Guess again. Supply and demand teaches the greenies another lesson. Instead of adding 15 cents a gallon it adds 27 and that may go even higher.
Environmentalists don't care what it costs or even if they are wrong since YOU pay for their cause one way or another. I plan to rebuild my carbs with new o-rings from bob barr, i think his are alcohol resistant.
Sorry for the opinion laced rant, this should be in off topic I know.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
Comment