Orange/White from Coil/Tri-Mod GS450

[pmilano1]

I'm benching the motor, and have the wiring figured out (sort of).

I don't know what the other end (of 4) orange/white goes to.I have Coil/Coil/Tri, but the other end, which usually goes to the switch I think (diagram) I don't know. Should that be grounded?

Do I need ANYTHING else to get it to turn over? Just the Tri, Coils and some juice, right?

Just got it back together and want to give it a few revs before mounting.

I'm working on this today, so if anyone has any info for me it would be greatly appreciated!

Thanks

P

[pmilano1]

Anyone know anything about this?

[Billy Ricks]

Not sure about your wiring but on my bike I have an orange and white wire going to each coil.

[pmilano1]

Yeah, that part I have. I also have it going to the ignitor module, but the other lead is what is in question. I think that it is going to the run switch, which I believe is power. I'm just trying to confirm before I pop the module!

Thanks-

P

[Billy Ricks]

My diagram shows it going to the starter switch/kill switch where it branches off and runs back to the fuse box.