exhaust fit

[sae3231]

will a complete 4-2 stock exhaust from an 82 850 fit on a 82 1100? I don't mind if I lose some power I just need to know if it will fit. Also, I broke three of the exhaust bolts when removing the pipes, There is between 1/4 and 3/8 of an inch exposed. What is the best way to get these out. I don't want to break these off inside the head. Can I heat the with a torch to make removel easier? what kind of torch (propane/acytelene) should I use?

[katoranger]

Post which submodels your are referring to like 850G or L.

Allen

[sae3231]

sorry, they are both L models. I hope that helps.

[katoranger]

I don't know the answer for you, but that should help those who do.

Allen

[kalessin]

I believe the exhaust will line up on the frame and engine, and they use the same gasket at the engine head. However, the exhaust pieces used different part numbers, so there must have been some difference.