Announcement

Collapse
No announcement yet.

carb exchange

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    carb exchange

    Will 1980 850 carb fit 1981 750

    #2
    Yes ,GS850 is the same as a 750 but it"s just bored out.

    Comment


      #3
      I do believe they both use 32mm.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        Thanks for the input, the reason Iwas asking was I got a careless removing an idle jet cap on #2 carb and I can't set the needle to
        get that cyl. to run(stays cool on idle) hot when ran at a higher throttle.
        So I created the problem, and I have to remedy the fix!
        If I can find another BS type carb, I will only have to transfer parts
        after a good cleaning, this is kinda what I was thinking???? Yes??????

        bmac

        Comment


          #5
          Fine

          That will work just fine but be sure to check your jet sizes....because at least some of them are different. You can check the schematic and figure out just what you'll need!:-D
          1980 GS1100E....Number 15!

          Comment


            #6
            Thanks, I hope all is well in sunny Cali- forn-ya, I hope to be moving to
            southern Cal. within the next year. Mother in law getting old and such.
            It is nice there but lots of money to live! A change from Chgo. will be nice!
            Once again thanks for the info!


            bmac

            Comment


              #7
              You'll need the extra money just to afford to live here.
              1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
              1985 GS1150ES stock with 85 Red E bodywork.

              Comment


                #8
                Hey Chef, I guess if I don't eat when I move there my stay will be a short one! Take care......


                bmac

                Comment

                Working...
                X