Announcement

Collapse
No announcement yet.

JB Weld and tank prep Acid?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    JB Weld and tank prep Acid?

    Can anyone tell me if you can use JB Weld as an outside pinhole leak stopper when you prep the fuel tank for por 15 or Kreem? The tank WAS Kreemed before and looks like $&!*, it's all peeled and gross. I have some serious pinholes. I want to try Por 15. I'll probably get the car gas tank kit. It's only $80.00 for a pint of it! I have a 71 CB 350 that I can also do.
    Has anyone tried a tank that has had JB Weld on it when coating??

    #2
    I can tell you that JB Weld works fine to hold back gas. I have repaired my sending unit float with it.
    Currently bikeless
    '81 GS 1100EX - "Peace, by superior fire power."
    '06 FZ1000 - "What we are dealing with here, is a COMPLETE lack of respect for the law."

    I ride, therefore I am.... constantly buying new tires.

    "Tell me what kind of an accident you are going to have, and I will tell you which helmet to wear." - Harry Hurt

    Comment


      #3
      JB Weld

      Thanks I hope this will work. Last ditch effort before tossing tank.

      Comment


        #4
        jon...don't waste your time/money

        please read jethro's recent rusty tank for a cheap and easy way to do your tank...

        Comment

        Working...
        X