Thanks, Terry South
Announcement
Collapse
No announcement yet.
Fixing Small Hole In Muffler
Collapse
X
-
Anonymous
Fixing Small Hole In Muffler
I have a small (dime size) hole developing in the bottom of one of my mufflers. What is the best way to fix this hole? I have heard that JB Weld will do it but I have never tried it. Does anyone know the best method?
Thanks, Terry SouthTags: None
-
WifeofDink
Cut a piece of steel as a patch and have it brazed on rather than have it electric welded on. This should solve the problem
-
moto_dan
Re: Fixing Small Hole In Muffler
I've used JB Weld for about everything, but have not had satisfactory results using it on exhaust systems, especially motorcycles. Try what Dinks Wife said.
Comment
-
Anonymous
Hole in exhaust
I had a much larger hole (3" x 4") repaired by a professional welding shop using a mig or tig welder. They did a nice clean job; no excess weld / slag dripping off anywhere. He charged $25 for the job.
Jeff
Comment
-
silverhorse47
There are also 'filler rods' that can braise fill this size hole...if you can find the right torch.
Comment
Comment