.png "Powered by vBulletin")
hi, i recently removed the carburators from my bike to replace the floats... upon attempting reassembly, i noticed the spacers that lay up against the cylinder heads were not bored-out completely round, but had this a-symetrical notch-like thing inside... this spacer may be screwed in to have that notch either on the top or on the bottom.. and nothing clues you in as to which way it should go... HELP?
-
Last edited by Guest; 07-04-2006, 03:19 PM. -
Year, model and CC?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
1979 suzuki gs425e... god bless you.Comment
-
i checked out the schematic on bikebandit's website.. it's all drawn by hand so its hard to distinguish accuracy vs. artistic license.. but its lookin like the notch orients on the bottom..Comment
Comment