Announcement

Collapse
No announcement yet.

It's Alive!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    It's Alive!!!

    YESSSS!! After a tear down of the carbs and finding several things wrong, I got it back together!! GS1000G,4 into 1, Pods and stage 3 jet kit. Had to go 3.25 out on air screws but it now runs great! No backfire, no popping on decel. One of the slides had the vacuum port drilled to over 1/8":shock: :shock: . Filled it back with metal set epoxy and redrilled to right size. Pulled plugs after a 20 minute ride and they are tan!! Pulls great from off idle till it hits the powerband and then WHAM!! It screams...
    Thanks guys for a great sight!I would never figured these carbs out without this place!!
    Ken

    #2
    So you used the dynojet stage3?

    Comment


      #3
      Yes I did. I had to go to 3.25 turns out on the air screw. Going to get it vacuum synch'd next. It runs great now. Cranks first time after setting overnight(choke on) now and no popping , backfiring. Pulls real good to. Now I just have to get the clutch redone and I am ready to ride!
      Ken

      Comment


        #4
        gr8 work ken - enjoy the ride...:-D

        Comment

        Working...
        X