copper spaghetti

[Anonymous]

Calling all wire experts! I'm in the middle of changing grounds,wiring harness, stator, and reg/rec on GS850G(1980)
The question is.......... can I run all 3 phases of stator directly to the reg/rect. The wiring diagram and the old setup had one leg of the stator going up on grn/wht and jumped back to the reg/rect on red/wht.
Can't I bypass this? Was this done for an electric guage?
Is it safe to assume the new harness is made up the same way w/ red/wht and grn/wht tied together in the bundle? I performed an autopsy on the old harness and the two were butted together, but it was imposssible to tell if this was done later on.
Any insight is appreciated :?
sbk in boston

[daveo]

I'm pretty sure the wire you're talking about is for the 'not charging' light

[SqDancerLynn1]

I have My gs850 wired direct to theReg/rect The third stator wire loops up thru the head light switch. Turns the third leg on when the lights are used

[Anonymous]

Maybe a diagram would be helpful:

http://home.wanadoo.nl/kastanje/www/Schematic.html

Hires...