Announcement

Collapse
No announcement yet.

Rapping Noise? 82 Suzuki GS1100E

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rapping Noise? 82 Suzuki GS1100E

    I get a rapping noise when pulling out in 1st gear and then again for a little in Second. It seems to come from underneath the bike. It's hard to isolate as it only happens in gear while pulling out.

    The background is that it is an '82 Suzuki GS1100E
    Its got about 19000 miles on it.

    I checked for loose parts. I suspect the chain, but cant be sure. It almost sounds like a loose nut in the oil being blown around by the flow of fluid. I dont even know if that is possible.
    Otherwise it seems to run just fine. I have ordered a manual for the bike and it should be in very soon. I just want to make sure that I'm not hurting it in the process by riding it.
    Do you all think that it may be the chain? What should I look for?

    #2
    How loose is the chain?
    If you put it in gear while one the center stand, and rock the rear wheel do you hear any noises? Like the front sprocket is loose?

    dangerous but you can try this
    put the front tire against a wall, bike on center stand, put it in 1/st gear,
    release the clutch....you may be able to help pin point the noise

    again not advisible very dangerous!
    Keith
    -------------------------------------------
    1980 GS1000S, blue and white
    2015Triumph Trophy SE

    Ever notice you never see a motorcycle parked in front of a psychiatrist office?

    Comment


      #3
      If it's not a sprocket or chain open up your clutch and take a look.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        I've got money on the chain. If you replace the chain, do the sprockets also.

        Comment

        Working...
        X