Announcement

Collapse
No announcement yet.

stock main jet sizes GS650L?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    stock main jet sizes GS650L?

    trying to diagnose poor top end running, and find that after doing high speed plug chop (the right way, from advice here) it seems to be running much too rich: i.e. black soot on #4 plug, 1-2-3 looking black but not as sooty.

    Since the PO had no air filter and gutted exhausts, maybe he up-jetted to compensate. But now that I've reinstalled an air filter and mufflers... anybody out there know the stock main jet size for a 1982 GS650GLZ? I'll go to that for a starting point.

    Low speed running (up to about 1/8 throttle) is great, got the air screws fiddled right. And the mid-range jet needles are clip-adjustable, that's next.

    #2
    This site states stock jet sizes.

    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      Originally posted by chef1366
      This site states stock jet sizes.

      http://www.mrcycles.com/
      Thanks! It's a 110. Now to go see what's actually in there.

      Comment


        #4
        success!

        Installed 105 main jets, runs much better now (I am at kind of high altitude, 3500+ feet). Better running for sure and probably better gas mileage as well.

        When I get time, might try a little leaner yet.

        Comment

        Working...
        X